2020 Jenz HEM 583 Z

JENZ mobile chipper, type HEM 583 Z. For technical details of the basic version, please refer to the product description no. HEM583Z-500021694-18/02E Rotor in open design : Advantages: low fines content and good chip flow with coarse chips Machine supplied without ABS system Road approval up to 60 km/h Tires 600/50 22.5, radial, Alliance profile 390 for 2-axle chassis, approved up to 70km/h, rim with valve protection incl. 4 warning signs, 2 each at the front and rear, mounted on the machine, can be attached and removed mechanically Bracket for mounting a loader crane from the manufacturer Farmi / Loglift / Epsilon up to 120 kNm max. gross lifting torque Automatic trailer coupling D40, manufactured by Rockinger including - Socket for light connection 7-pin - Brake connection (coupling head red/yellow, ISO standard 1728 - Double-acting hydraulic connection; plug-in coupling sleeve DN 12 acc. to ISO 7241-1 series A (internal thread 1/2 inch). Permissible trailer load & drawbar load see product description of the basic machine PTO shaft P700PG Possible tractor-side PTO connections: 1 3/4“, 6 teeth 1 3/4”, 20 teeth - 93cm height (center axle) Towing eye for ball coupling, Scharmüller K80, maximum drawbar load 2,500 kg - K80 1.08 m high plate LED work lights complete, for machines with Epsilon crane M70/M80/S100/S110. 7 LED work lights, mounted as follows: 4 pieces on the crane (2x on the main arm L/R, 2x on the luffing arm L/R) 2 pieces on the chipper (blow-out pipe or conveyor belt), 1 piece LED spotlight with additional toggle switch in the rear door. Chipper Feed Assistant 2 Automatic adjustment of the feed speed depending on the opening angle of the top roller. The chipper runs in an optimum working range and ensures a constant quality chip Special paint finish according to RAL color scale RAL6009 GREEN Instructions for use : NL