Message delivered to the advisor will contact soon to schedule an appointment.
Your shipping request has been forwarded; an advisor will contact you soon.
Your inspection request has been sent successfully. You will be contacted soon.

2020 Sany STC550

Overview


Category

Make

Model

Year
2020

Condition

Hours
3,219 hrs

Location

SKU
1294034

Description
Analysis of the core advantages of SANY STC500T 50-ton truck crane
As the flagship product of SANY's medium-tonnage cranes, STC500T demonstrates outstanding competitiveness in lifting performance, intelligent control and adaptability to working conditions. The following are its six core advantages:

1. Super lifting performance
🔥 Industry-leading lifting capacity

50-ton strongest lifting load: basic arm maximum lifting torque 1980kN·m, 5% higher than similar models

Fully extended arm 42 meters (the longest in the same tonnage in the industry), end lifting weight 1.2 tons

Counterweight 15 tons (optional hydraulic automatic loading and unloading)

⚡ Intelligent working condition identification

Automatically limit dangerous operations (such as overloading, over-radius lifting)

Six-section U-shaped main arm (retraction time <150 seconds, 10% faster than competitors)

2. Efficient power system
🛠️ Sany exclusive power chain

Upper body: Sany self-made hydraulic system (pressure 35MPa, flow 2×180L/min)

Chassis: Mercedes-Benz/Sany joint development (maximum climbing grade 45%)

Fuel consumption is 12-15% lower than the industry average

🎯 Dual pump confluence technology

Lifting speed 135m/min (no load), heavy load micro-motion accuracy ±1mm

III. Intelligent control revolution
🚀 10.1-inch smart terminal

3D lifting simulation (predict collision risk)

Real-time display:

Outrigger pressure distribution

Wind speed warning (>8m/s automatic alarm)

Wire rope life monitoring

🕹️ Handle integrated control

Single handle to achieve winch + amplitude change compound action

Tactile feedback (handle vibration warning when overloaded)

IV. Ultimate safety design
🛡️ Multiple safety protection

Outrigger automatic leveling system (accuracy ±0.1°)

Wire rope anti-overwinding triple protection (mechanical + electronic + hydraulic)

Optional night operation package (20 LED lights + infrared camera)

⚙️ Strengthening of key components

Tensile strength of main arm steel 960MPa (equivalent to aircraft carrier deck steel)

Laser cladding of hydraulic cylinder rod (wear resistance increased by 3 times)

V. Economic advantages
💰 TCO comparison (5 years)

Project STC500T XCMG XCT50 Advantages
Fuel consumption (L/h) 14-16 16-18 -12%
Maintenance interval (h) 500 300 +66%
Residual value (3 years) 70% 65% +5%
🛠️ Convenient maintenance

Hydraulic strut opening of engine hood (single-person operation)

Centralized lubrication system (50 lubrication points completed in 10 minutes)

VI. Typical working conditions
Operation scenario STC500T capacity Industry average 50 tons
Steel structure hoisting 25 tons @ 12 meters radius 22 tons @ 12 meters radius
Wind power maintenance 1.5 tons @ 40 meters height 1.2 tons @ 40 meters height
Continuous operation 72 hours without failure (actual measurement) 48 hours
Three golden application scenarios
Urban complex construction: precise lifting in narrow sites (minimum turning radius 11 meters)

Wind power maintenance: 2MW wind turbine cabin replacement (optional wind power kit required)

Petrochemical installation: explosion-proof area operation (Ex certified version)
Analysis of the core advantages of SANY STC500T 50-ton truck crane
As the flagship product of SANY's medium-tonnage cranes, STC500T demonstrates outstanding competitiveness in lifting performance, intelligent control and adaptability to working conditions. The following are its six core advantages:

1. Super lifting performance
🔥 Industry-leading lifting capacity

50-ton strongest lifting load: basic arm maximum lifting torque 1980kN·m, 5% higher than similar models

Fully extended arm 42 meters (the longest in the same tonnage in the industry), end lifting weight 1.2 tons

Counterweight 15 tons (optional hydraulic automatic loading and unloading)

⚡ Intelligent working condition identification

Automatically limit dangerous operations (such as overloading, over-radius lifting)

Six-section U-shaped main arm (retraction time <150 seconds, 10% faster than competitors)

2. Efficient power system
🛠️ Sany exclusive power chain

Upper body: Sany self-made hydraulic system (pressure 35MPa, flow 2×180L/min)

Chassis: Mercedes-Benz/Sany joint development (maximum climbing grade 45%)

Fuel consumption is 12-15% lower than the industry average

🎯 Dual pump confluence technology

Lifting speed 135m/min (no load), heavy load micro-motion accuracy ±1mm

III. Intelligent control revolution
🚀 10.1-inch smart terminal

3D lifting simulation (predict collision risk)

Real-time display:

Outrigger pressure distribution

Wind speed warning (>8m/s automatic alarm)

Wire rope life monitoring

🕹️ Handle integrated control

Single handle to achieve winch + amplitude change compound action

Tactile feedback (handle vibration warning when overloaded)

IV. Ultimate safety design
🛡️ Multiple safety protection

Outrigger automatic leveling system (accuracy ±0.1°)

Wire rope anti-overwinding triple protection (mechanical + electronic + hydraulic)

Optional night operation package (20 LED lights + infrared camera)

⚙️ Strengthening of key components

Tensile strength of main arm steel 960MPa (equivalent to aircraft carrier deck steel)

Laser cladding of hydraulic cylinder rod (wear resistance increased by 3 times)

V. Economic advantages
💰 TCO comparison (5 years)

Project STC500T XCMG XCT50 Advantages
Fuel consumption (L/h) 14-16 16-18 -12%
Maintenance interval (h) 500 300 +66%
Residual value (3 years) 70% 65% +5%
🛠️ Convenient maintenance

Hydraulic strut opening of engine hood (single-person operation)

Centralized lubrication system (50 lubrication points completed in 10 minutes)

VI. Typical working conditions
Operation scenario STC500T capacity Industry average 50 tons
Steel structure hoisting 25 tons @ 12 meters radius 22 tons @ 12 meters radius
Wind power maintenance 1.5 tons @ 40 meters height 1.2 tons @ 40 meters height
Continuous operation 72 hours without failure (actual measurement) 48 hours
Three golden application scenarios
Urban complex construction: precise lifting in narrow sites (minimum turning radius 11 meters)

Wind power maintenance: 2MW wind turbine cabin replacement (optional wind power kit required)

Petrochemical installation: explosion-proof area operation (Ex certified version)

Show more Show less
Inspection Service
Get Quote
Inspection Service By
Mevas
Back
img