X
Construction Equipment
Trucks and Trailers
Lifting Equipment
Agricultural Equipment
Vehicles
Live Auctions
2009 Geomachine GM100GT
Year
2009
Hrs.
5,005
Condition
Used
1
of
16
2009 Geomachine GM100GT
1
of
16
Overview
Description
GM100GT
The GM100GT is a full-fledged drilling rig that can be used for drill drilling, reflection drilling, press reflection drilling, installation of groundwater pipes and sampling.
The machine has a radio remote control for driving, winch and bulldozer. The controls for the drilling functions are in the control panel that can be turned to the side. For press jig drilling, the drill carriage has constant speed controls for rotation and for input speed.
The drill trailer has a double rod lock, the upper one is a swivel rod/shock tube lock for opening.
The feed length is 280 cm and the drill neck is K-6 75 GST92/R38N, customer specific the drill neck can be changed to match the customer's equipment. The drilling trailer has a rotating bar holder on the right side of the machine and a shock tube/
Accessory holder in the front of the machine on top of the bumper plate.
GM100GT DRILL RIG DETAILS:
YOM: 2009
Workinghours: about 5000 h
Diesel engine: Perkins 1104D-E44TA 97 kW 4-cyl.
Engine oil: 10W-40 fully synthetic
Hydraulic pumps: JRR075/JRR065/SNP3 26
Hydraulic valves: Sauer-Danfoss PVG32
Hydraulic hammer: Furukawa F3
Hydraulic oil: Liquid 32
Hydraulic tank: ~300 liters
Fuel tank: ~120 liters
Radio control: Scanreco RC400
Compressor: Gardner Denver CT12
Water pump: Interpump T88
Hydraulic winch: Warn series 18
Recorder: GM Tracker
Length: 5800 mm
Width: 2100 mm
Height: 2600 mm (in transport position)
Weight: ~7500 kg (depending on equipment)
GM100GT
The GM100GT is a full-fledged drilling rig that can be used for drill drilling, reflection drilling, press reflection drilling, installation of groundwater pipes and sampling.
The machine has a radio remote control for driving, winch and bulldozer. The controls for the drilling functions are in the control panel that can be turned to the side. For press jig drilling, the drill carriage has constant speed controls for rotation and for input speed.
The drill trailer has a double rod lock, the upper one is a swivel rod/shock tube lock for opening.
The feed length is 280 cm and the drill neck is K-6 75 GST92/R38N, customer specific the drill neck can be changed to match the customer's equipment. The drilling trailer has a rotating bar holder on the right side of the machine and a shock tube/
Accessory holder in the front of the machine on top of the bumper plate.
GM100GT DRILL RIG DETAILS:
YOM: 2009
Workinghours: about 5000 h
Diesel engine: Perkins 1104D-E44TA 97 kW 4-cyl.
Engine oil: 10W-40 fully synthetic
Hydraulic pumps: JRR075/JRR065/SNP3 26
Hydraulic valves: Sauer-Danfoss PVG32
Hydraulic hammer: Furukawa F3
Hydraulic oil: Liquid 32
Hydraulic tank: ~300 liters
Fuel tank: ~120 liters
Radio control: Scanreco RC400
Compressor: Gardner Denver CT12
Water pump: Interpump T88
Hydraulic winch: Warn series 18
Recorder: GM Tracker
Length: 5800 mm
Width: 2100 mm
Height: 2600 mm (in transport position)
Weight: ~7500 kg (depending on equipment)
The GM100GT is a full-fledged drilling rig that can be used for drill drilling, reflection drilling, press reflection drilling, installation of groundwater pipes and sampling.
The machine has a radio remote control for driving, winch and bulldozer. The controls for the drilling functions are in the control panel that can be turned to the side. For press jig drilling, the drill carriage has constant speed controls for rotation and for input speed.
The drill trailer has a double rod lock, the upper one is a swivel rod/shock tube lock for opening.
The feed length is 280 cm and the drill neck is K-6 75 GST92/R38N, customer specific the drill neck can be changed to match the customer's equipment. The drilling trailer has a rotating bar holder on the right side of the machine and a shock tube/
Accessory holder in the front of the machine on top of the bumper plate.
GM100GT DRILL RIG DETAILS:
YOM: 2009
Workinghours: about 5000 h
Diesel engine: Perkins 1104D-E44TA 97 kW 4-cyl.
Engine oil: 10W-40 fully synthetic
Hydraulic pumps: JRR075/JRR065/SNP3 26
Hydraulic valves: Sauer-Danfoss PVG32
Hydraulic hammer: Furukawa F3
Hydraulic oil: Liquid 32
Hydraulic tank: ~300 liters
Fuel tank: ~120 liters
Radio control: Scanreco RC400
Compressor: Gardner Denver CT12
Water pump: Interpump T88
Hydraulic winch: Warn series 18
Recorder: GM Tracker
Length: 5800 mm
Width: 2100 mm
Height: 2600 mm (in transport position)
Weight: ~7500 kg (depending on equipment)
Show more Show less
