2026 EUROMIX MTP 12M³

Year of manufacture: 2026
New: Yes
Colour: White
Applicable material: Concrete
GVW: 44.000 kg
Make of bodywork: EuromixMTP EM 12 R
VAT: The price shown is excluding VAT
Please contact Harun Cevik (+491735100933, hc@euromix.de) or Denis Omeragic (+49 178 7800047, info@euromix.de) for more information

EUROMIX TO GO – new vehicles available immediately from stock in Porta Westfalica, Germany. Fully built, direct from the manufacturer – ideal for a short-term capacity increase or a replacement investment.

Price negotiable – please contact us.

EuromixMTP 12 cbm mixer semi-trailer

EuromixMTP - truck mixer body EM 12 R - Regular

Model: EM 12 R
Nominal volume 12m³ ready-mix concrete
Mixing drum in regular design
Mixing drum in regular version made of S355
Mixing spirals in regular version made of S420 MC
Gearbox make ZF P5300
Hydraulic pump Bosch Rexroth
Hydraulic motor Bosch Rexroth
Integrated oil cooling system
Mechanical mixer control and electric start/stop
Compressed-air water system
Water connection at the platform with hose line
Water filling line, one side with C-coupling
Mixing drum with one service hatch
Access ladder with platform
Rubber attachment on the charging hopper
Swivelling single-arm steel discharge chute
Wear plates in charging hopper, discharge bowl and swivel chute
Drum lock to secure the drum during maintenance
Polyurethane primer
Weight approx. 4.725kg, deviations +/- 5%
with emergency stop function according to EU safety standards
Steel mudguards over the rear axles
2x extension chutes made of steel or plastic
Water system
Water tank 650l (compressed air)
Steel water tank
Shut-off valve mounted below the water tank in the filling line
Water connection „C“ coupling,
Controls & electrics

Mounted on EuromixMTP 3-axle semi-trailer

Vehicle type: EuromixMTP KIS 24 3-axle truck mixer chassis
Axles with short trailing arm ratio (310/340) for paver operation
Axle 9to SAF 22,5" disc brake, single tyres for air suspension
Axle track width: 2040 mm (standard dimension)
Axle spacing approx. 1400mm / 1400 mm
EBS braking system
Tyres 385/65 R 22.5
Plastic mudguards, 180 degrees, over each axle (for 3 axles )
Chassis paintwork in RAL 9005 jet black
Cathodic dip coating with zinc phosphating plus powder coating, maximum corrosion protection (only if
colour available in powder)
Tyre pressure monitoring basic version, connected to CAN bus system of the EBS
24 to telescopic landing gear with one-side operation and
Half-round with base plate
Axle loads: 24 000 kg (3 x 8000 kg, technical: 3x 9000kg)
Chassis length approx. 8570mm

Your advantages
• Ready for immediate use: concrete pumps, concrete mixers, tippers, hook-lift trucks
• Chassis, body and assembly from a single source
• Fair prices
• Financing in 19 European countries
• Trade-in of your used vehicle

Your contacts
• Denis Omeragic: +49 178 7800047 (German, English, Bosnian, Croatian, Serbian)
• Henri Omeragic: +49 178 7800045 (German, Bosnian, Croatian, Serbian)
• Harun Cevik: +49 173 5100933 (German, English, Turkish)
• Jamila Azzi: +49 160 96667822 (French, Arabic)
• Olga Tissen: +49 170 7457091 (German, Russian)
• Karolina Cyburt: +49 151 72011958 (Polish)

EuromixMTP GmbH, Gänsekamp 7, 32457 Porta Westfalica, Germany
info@euromix.de | www.euromix.de