معدات ثقيلة
كرينات
مناولة العتاد
الشاحنات والمقطورات
مركبة تجارية
معدات الزراعية
مزادات مباشرة
2025 اكس سي ام جي XC7-TV12
2025 اكس سي ام جي XC7-TV12
السنة
٢٠٢٥
حالة المعدة
جديد
١
من
٣
2025 اكس سي ام جي XC7-TV12
١
من
٣
نظرة عامة
الوصف
Analysis of the core advantages of XCMG XC7-TV12 skid loader
As the flagship model of large-tonnage skid loader, XCMG XC7-TV12 is designed for high-intensity municipal engineering, agricultural and forestry transformation and industrial material handling, setting new industry standards in terms of carrying capacity, operating efficiency and versatility. The following are its six core advantages:
1. Super power and stability
🔥 Cummins B3.3 engine
55kW (74 horsepower), in line with the National IV emission standards
Peak torque 320N·m@1600rpm (low-speed power increased by 25%)
Intelligent temperature control system (-30℃~50℃ all-weather operation)
⚖️ Strengthened chassis design
Working weight 3.8 tons (largest in the same class)
Standard full-time four-wheel drive + differential lock (mud traction increased by 40%)
2. Industry-leading attachment system
🛠️ X-Touch Pro quick-change system
Supports 120+ types of attachments (the most complete in the industry):
1.2m³ high-dump bucket (lifting height 3.2 meters)
Hydraulic milling machine (milling depth 150mm)
Forestry grab (grabbing force 5 tons)
Attachment replacement time <20 seconds (hydraulic self-locking to prevent falling off)
3. Precise operation control
🎯 Load-sensing hydraulic system
Flow automatically matches load (energy consumption reduced by 15%)
Pilot joystick (operating force only 3N, accuracy ±1°)
📱 7-inch smart terminal
Real-time display:
Engine/hydraulic parameters
Attachment working mode memory (can store 10 groups)
Remote fault diagnosis interface
4. Ultimate passability
🚜 All-terrain adaptation design
Ground clearance 280mm (passability is 20% higher than competitors)
Optional all-steel crawler (ground pressure only 25kPa)
🔄 Four-wheel steering system
Crab mode (side shift accuracy ±2cm)
Minimum turning radius 1.8 meters (no pressure in tunnel operation)
V. Economic advantages
💰 TCO comparison (3 years)
Project XC7-TV12 Bobcat S770 Doosan SV75
Hourly fuel consumption 6-7L 7-8L -15%
Maintenance cost ¥0.8/hour ¥1.2/hour -33%
Attachment compatibility 120+ 90+ +30%
🛠️ Maintenance convenience
Engine compartment opens 90° (filter within reach)
Centralized lubrication system (50 lubrication points completed in 10 minutes)
VI. Safety and comfort
🚀 FOPS/ROPS certified cab
Panoramic glass (attachment operation status can be seen below)
Suspension seat (three-level shock absorption, vibration reduction of 50%)
Noise control 72dB (one of the lowest in the industry)
🔒 Triple safety protection
Automatic hydraulic lock (attachments automatically lock after shutdown)
Emergency dual brake system (braking distance shortened by 30%)
Three golden application scenarios
Municipal engineering
Winter snow removal (snow shovel efficiency up to 300m³/h)
Asphalt repair (milling + compaction integrated operation)
Agricultural and forestry transformation
Orchard management (narrow body through 1.6m row spacing)
Wood handling (grab bucket + forklift mode fast switching)
Industrial warehousing
Container loading and unloading (lifting height 3.2 meters)
Scrap steel processing (magnetic suction cup + grab bucket combined operation)
Analysis of the core advantages of XCMG XC7-TV12 skid loader
As the flagship model of large-tonnage skid loader, XCMG XC7-TV12 is designed for high-intensity municipal engineering, agricultural and forestry transformation and industrial material handling, setting new industry standards in terms of carrying capacity, operating efficiency and versatility. The following are its six core advantages:
1. Super power and stability
🔥 Cummins B3.3 engine
55kW (74 horsepower), in line with the National IV emission standards
Peak torque 320N·m@1600rpm (low-speed power increased by 25%)
Intelligent temperature control system (-30℃~50℃ all-weather operation)
⚖️ Strengthened chassis design
Working weight 3.8 tons (largest in the same class)
Standard full-time four-wheel drive + differential lock (mud traction increased by 40%)
2. Industry-leading attachment system
🛠️ X-Touch Pro quick-change system
Supports 120+ types of attachments (the most complete in the industry):
1.2m³ high-dump bucket (lifting height 3.2 meters)
Hydraulic milling machine (milling depth 150mm)
Forestry grab (grabbing force 5 tons)
Attachment replacement time <20 seconds (hydraulic self-locking to prevent falling off)
3. Precise operation control
🎯 Load-sensing hydraulic system
Flow automatically matches load (energy consumption reduced by 15%)
Pilot joystick (operating force only 3N, accuracy ±1°)
📱 7-inch smart terminal
Real-time display:
Engine/hydraulic parameters
Attachment working mode memory (can store 10 groups)
Remote fault diagnosis interface
4. Ultimate passability
🚜 All-terrain adaptation design
Ground clearance 280mm (passability is 20% higher than competitors)
Optional all-steel crawler (ground pressure only 25kPa)
🔄 Four-wheel steering system
Crab mode (side shift accuracy ±2cm)
Minimum turning radius 1.8 meters (no pressure in tunnel operation)
V. Economic advantages
💰 TCO comparison (3 years)
Project XC7-TV12 Bobcat S770 Doosan SV75
Hourly fuel consumption 6-7L 7-8L -15%
Maintenance cost ¥0.8/hour ¥1.2/hour -33%
Attachment compatibility 120+ 90+ +30%
🛠️ Maintenance convenience
Engine compartment opens 90° (filter within reach)
Centralized lubrication system (50 lubrication points completed in 10 minutes)
VI. Safety and comfort
🚀 FOPS/ROPS certified cab
Panoramic glass (attachment operation status can be seen below)
Suspension seat (three-level shock absorption, vibration reduction of 50%)
Noise control 72dB (one of the lowest in the industry)
🔒 Triple safety protection
Automatic hydraulic lock (attachments automatically lock after shutdown)
Emergency dual brake system (braking distance shortened by 30%)
Three golden application scenarios
Municipal engineering
Winter snow removal (snow shovel efficiency up to 300m³/h)
Asphalt repair (milling + compaction integrated operation)
Agricultural and forestry transformation
Orchard management (narrow body through 1.6m row spacing)
Wood handling (grab bucket + forklift mode fast switching)
Industrial warehousing
Container loading and unloading (lifting height 3.2 meters)
Scrap steel processing (magnetic suction cup + grab bucket combined operation)
As the flagship model of large-tonnage skid loader, XCMG XC7-TV12 is designed for high-intensity municipal engineering, agricultural and forestry transformation and industrial material handling, setting new industry standards in terms of carrying capacity, operating efficiency and versatility. The following are its six core advantages:
1. Super power and stability
🔥 Cummins B3.3 engine
55kW (74 horsepower), in line with the National IV emission standards
Peak torque 320N·m@1600rpm (low-speed power increased by 25%)
Intelligent temperature control system (-30℃~50℃ all-weather operation)
⚖️ Strengthened chassis design
Working weight 3.8 tons (largest in the same class)
Standard full-time four-wheel drive + differential lock (mud traction increased by 40%)
2. Industry-leading attachment system
🛠️ X-Touch Pro quick-change system
Supports 120+ types of attachments (the most complete in the industry):
1.2m³ high-dump bucket (lifting height 3.2 meters)
Hydraulic milling machine (milling depth 150mm)
Forestry grab (grabbing force 5 tons)
Attachment replacement time <20 seconds (hydraulic self-locking to prevent falling off)
3. Precise operation control
🎯 Load-sensing hydraulic system
Flow automatically matches load (energy consumption reduced by 15%)
Pilot joystick (operating force only 3N, accuracy ±1°)
📱 7-inch smart terminal
Real-time display:
Engine/hydraulic parameters
Attachment working mode memory (can store 10 groups)
Remote fault diagnosis interface
4. Ultimate passability
🚜 All-terrain adaptation design
Ground clearance 280mm (passability is 20% higher than competitors)
Optional all-steel crawler (ground pressure only 25kPa)
🔄 Four-wheel steering system
Crab mode (side shift accuracy ±2cm)
Minimum turning radius 1.8 meters (no pressure in tunnel operation)
V. Economic advantages
💰 TCO comparison (3 years)
Project XC7-TV12 Bobcat S770 Doosan SV75
Hourly fuel consumption 6-7L 7-8L -15%
Maintenance cost ¥0.8/hour ¥1.2/hour -33%
Attachment compatibility 120+ 90+ +30%
🛠️ Maintenance convenience
Engine compartment opens 90° (filter within reach)
Centralized lubrication system (50 lubrication points completed in 10 minutes)
VI. Safety and comfort
🚀 FOPS/ROPS certified cab
Panoramic glass (attachment operation status can be seen below)
Suspension seat (three-level shock absorption, vibration reduction of 50%)
Noise control 72dB (one of the lowest in the industry)
🔒 Triple safety protection
Automatic hydraulic lock (attachments automatically lock after shutdown)
Emergency dual brake system (braking distance shortened by 30%)
Three golden application scenarios
Municipal engineering
Winter snow removal (snow shovel efficiency up to 300m³/h)
Asphalt repair (milling + compaction integrated operation)
Agricultural and forestry transformation
Orchard management (narrow body through 1.6m row spacing)
Wood handling (grab bucket + forklift mode fast switching)
Industrial warehousing
Container loading and unloading (lifting height 3.2 meters)
Scrap steel processing (magnetic suction cup + grab bucket combined operation)
أظهر المزيد عرض أقل
تواصل مع البائع
الصّين
عضو في موقع المعدات والاليات منذ
Jun. 2025
