معدات ثقيلة
كرينات
مناولة العتاد
الشاحنات والمقطورات
مركبة تجارية
معدات الزراعية
مزادات مباشرة
2022 كوبوتا U25
2022 كوبوتا U25
السنة
٢٠٢٢
ساعات
٥٦١
حالة المعدة
مستعملة
١
من
٤
2022 كوبوتا U25
١
من
٤
نظرة عامة
الوصف
Analysis of the core advantages of Kubota U25 mini excavator
As a benchmark product of 3-ton mini excavators, Kubota U25 is designed for narrow space operations, municipal engineering and agricultural applications, and excels in flexibility, fuel efficiency and reliability. The following are its six core advantages:
1. Super passability and flexibility
📏 Compact body design
Width is only 980mm (can pass through standard door frames)
Tail rotation radius is 0mm (no collision when working against the wall)
Minimum ground clearance is 240mm (strong passability on rough terrain)
🔄 Multi-mode steering system
Track is retractable (width adjustment range is 980-1,280mm)
Optional rubber track (to protect hardened ground)
2. Kubota exclusive power technology
🔥 Kubota D1803-M-E3 engine
18.6kW (25 horsepower), compliant with Euro V/National IV emissions
Intelligent idle control (automatically reduces speed to 1,000rpm when no operation)
Fuel consumption is only 2.5-3L/h (one of the lowest in the same class)
⚡ Hydraulic system optimization
Dual pump independent control (compound action fluency improved by 20%)
Boom regeneration circuit (energy utilization increased by 15%)
III. Precision operation capability
🎯 Tailless slewing design
360° no-dead-angle operation in narrow lanes
Standard 2.5-meter side shift arm (digging against the wall without moving the machine body)
🖐️ Humanized control
Pilot control handle (operating force is 60% less than that of mechanical lever)
Automatic trenching mode (depth accuracy ±2cm)
IV. Super durability
🛡️ Strengthened structural design
Boom/arm uses high-strength steel plate (lifespan up to 10,000 hours)
Fully sealed bearings (dustproof and waterproof grade IP67)
⚙️ Upgrade of key components
Kawasaki hydraulic pump (durability is 3 times higher than domestic products)
Chrome-plated hydraulic cylinder rod (rust-proof life increased by 50%)
V. Comfort and safety
🚜 Panoramic cab
Bucket tip visible from the front/below (no blind spot)
Suspended seat (vibration reduced by 40%)
Noise level only 69dB (one of the lowest in the industry)
🔒 Multiple safety protections
Automatic hydraulic lock (cylinder automatically locks after engine shutdown)
Roll cage (FOPS certified)
VI. Economic advantages
💰 5-year total cost comparison
Project U25 Domestic equivalent Advantages
Fuel consumption (L/h) 2.8 3.5-4.0 -25%
Maintenance interval (h) 500 250 +100%
Residual value (3 years) 75% 50% +25%
🛠️ Quick maintenance design
Engine hood opens on the side (filter within easy reach)
Centralized lubrication points (maintenance completed in 10 minutes)
Analysis of the core advantages of Kubota U25 mini excavator
As a benchmark product of 3-ton mini excavators, Kubota U25 is designed for narrow space operations, municipal engineering and agricultural applications, and excels in flexibility, fuel efficiency and reliability. The following are its six core advantages:
1. Super passability and flexibility
📏 Compact body design
Width is only 980mm (can pass through standard door frames)
Tail rotation radius is 0mm (no collision when working against the wall)
Minimum ground clearance is 240mm (strong passability on rough terrain)
🔄 Multi-mode steering system
Track is retractable (width adjustment range is 980-1,280mm)
Optional rubber track (to protect hardened ground)
2. Kubota exclusive power technology
🔥 Kubota D1803-M-E3 engine
18.6kW (25 horsepower), compliant with Euro V/National IV emissions
Intelligent idle control (automatically reduces speed to 1,000rpm when no operation)
Fuel consumption is only 2.5-3L/h (one of the lowest in the same class)
⚡ Hydraulic system optimization
Dual pump independent control (compound action fluency improved by 20%)
Boom regeneration circuit (energy utilization increased by 15%)
III. Precision operation capability
🎯 Tailless slewing design
360° no-dead-angle operation in narrow lanes
Standard 2.5-meter side shift arm (digging against the wall without moving the machine body)
🖐️ Humanized control
Pilot control handle (operating force is 60% less than that of mechanical lever)
Automatic trenching mode (depth accuracy ±2cm)
IV. Super durability
🛡️ Strengthened structural design
Boom/arm uses high-strength steel plate (lifespan up to 10,000 hours)
Fully sealed bearings (dustproof and waterproof grade IP67)
⚙️ Upgrade of key components
Kawasaki hydraulic pump (durability is 3 times higher than domestic products)
Chrome-plated hydraulic cylinder rod (rust-proof life increased by 50%)
V. Comfort and safety
🚜 Panoramic cab
Bucket tip visible from the front/below (no blind spot)
Suspended seat (vibration reduced by 40%)
Noise level only 69dB (one of the lowest in the industry)
🔒 Multiple safety protections
Automatic hydraulic lock (cylinder automatically locks after engine shutdown)
Roll cage (FOPS certified)
VI. Economic advantages
💰 5-year total cost comparison
Project U25 Domestic equivalent Advantages
Fuel consumption (L/h) 2.8 3.5-4.0 -25%
Maintenance interval (h) 500 250 +100%
Residual value (3 years) 75% 50% +25%
🛠️ Quick maintenance design
Engine hood opens on the side (filter within easy reach)
Centralized lubrication points (maintenance completed in 10 minutes)
As a benchmark product of 3-ton mini excavators, Kubota U25 is designed for narrow space operations, municipal engineering and agricultural applications, and excels in flexibility, fuel efficiency and reliability. The following are its six core advantages:
1. Super passability and flexibility
📏 Compact body design
Width is only 980mm (can pass through standard door frames)
Tail rotation radius is 0mm (no collision when working against the wall)
Minimum ground clearance is 240mm (strong passability on rough terrain)
🔄 Multi-mode steering system
Track is retractable (width adjustment range is 980-1,280mm)
Optional rubber track (to protect hardened ground)
2. Kubota exclusive power technology
🔥 Kubota D1803-M-E3 engine
18.6kW (25 horsepower), compliant with Euro V/National IV emissions
Intelligent idle control (automatically reduces speed to 1,000rpm when no operation)
Fuel consumption is only 2.5-3L/h (one of the lowest in the same class)
⚡ Hydraulic system optimization
Dual pump independent control (compound action fluency improved by 20%)
Boom regeneration circuit (energy utilization increased by 15%)
III. Precision operation capability
🎯 Tailless slewing design
360° no-dead-angle operation in narrow lanes
Standard 2.5-meter side shift arm (digging against the wall without moving the machine body)
🖐️ Humanized control
Pilot control handle (operating force is 60% less than that of mechanical lever)
Automatic trenching mode (depth accuracy ±2cm)
IV. Super durability
🛡️ Strengthened structural design
Boom/arm uses high-strength steel plate (lifespan up to 10,000 hours)
Fully sealed bearings (dustproof and waterproof grade IP67)
⚙️ Upgrade of key components
Kawasaki hydraulic pump (durability is 3 times higher than domestic products)
Chrome-plated hydraulic cylinder rod (rust-proof life increased by 50%)
V. Comfort and safety
🚜 Panoramic cab
Bucket tip visible from the front/below (no blind spot)
Suspended seat (vibration reduced by 40%)
Noise level only 69dB (one of the lowest in the industry)
🔒 Multiple safety protections
Automatic hydraulic lock (cylinder automatically locks after engine shutdown)
Roll cage (FOPS certified)
VI. Economic advantages
💰 5-year total cost comparison
Project U25 Domestic equivalent Advantages
Fuel consumption (L/h) 2.8 3.5-4.0 -25%
Maintenance interval (h) 500 250 +100%
Residual value (3 years) 75% 50% +25%
🛠️ Quick maintenance design
Engine hood opens on the side (filter within easy reach)
Centralized lubrication points (maintenance completed in 10 minutes)
أظهر المزيد عرض أقل
تواصل مع البائع
الصّين
عضو في موقع المعدات والاليات منذ
Jun. 2025
