2021 جيه سي بي 4CX

Analysis of the core advantages of JCB 4CX Backhoe Loader
As the flagship model of the JCB backhoe series, 4CX has been fully upgraded based on 3CX and is optimized for high-intensity engineering and multi-functional operation scenarios. The following are its six core advantages:

1. Professional all-round configuration
🛠️ 5-in-1 super function

Front-end loading (1.25m³ enlarged bucket, lifting force 5.2 tons)

Rear-end excavation (depth 5.1m, excavation force 62kN)

Hydraulic crushing (optional 26-ton breaker)

Material clamping and transportation (optional wood grabber/scrap clamp)

Road compaction (with flat vibrator)

🌐 All-terrain overlord

4x4x4 drive (four-wheel steering + four-wheel drive)

Ground clearance 480mm (passability is 20% higher than competitors)

2. Power system innovation
🔥 JCB Dieselmax 448 engine

85kW (114 horsepower), compliant with Stage V/Tier 4 Final emissions

Dual-mode ECU (intelligent switching of economic/power mode)

Torque reserve increased to 520N·m (35% increase in low-speed power)

⚡ Pro hydraulic system

Dual pump confluence technology (front and rear ends operate at full power at the same time)

Pilot control response speed 0.3 seconds (fastest in the industry)

III. Extreme structural reinforcement
🛡️ Military-grade frame

Integral forged main beam (torsional rigidity is 50% higher than welded type)

Heavy-duty swing bridge (steering angle ±50°, flexibility increased by 30%)

⚙️ Mine-level durability

Hardox 450 steel plate is used for the boom (lifespan up to 20,000 hours)

Laser cladding technology for hydraulic cylinder rod (wear resistance increased by 3 times)

IV. Smart cockpit
🚀 Command Plus cab

The industry's first flat floor design (space increased by 25%)

Suspended seat with heating/ventilation function

Noise only 71dB (comparable to car-level quietness)

🖥️ 10-inch smart terminal

Real-time display:

Front and rear load distribution

Fuel consumption heat map

Accessory working parameters

V. Economic breakthrough
💰 Operation cost comparison

Project 4CX Carter 430 Case 695
Hourly fuel consumption 10-12L/h 12-15L/h 11-14L/h
Maintenance interval 750h 500h 500h
Maintenance accessibility ★★★★★ ★★★☆ ★★★★
🛠️ Revolutionary maintenance

Hydraulic support rod of engine hood opens with one button

Automatic reminder system for 50 lubrication points

VI. Absolute advantage of competitors
Indicator 4CX Gap between similar competitors
Loading efficiency 120 tons/hour +15%
Digging depth 5.1m +0.3m
Residual value rate (3 years) 78% +5-8%
Application scenario golden partner
Mining assistance: integrated operation of crushing + shipping

Municipal engineering: daytime excavation + nighttime cleaning mode switching

Port logistics: rapid transfer of container bulk cargo