2005 جوماكو COMMANDER III

Gomaco Commander III 4-track/3-track slipform paver
with 5.6m open front mold with auger
(can also be used as a three-leg machine with conveyor after conversion)
Incl. 2m trimmer, conveyor, used 2000mm sidewalk mold

The paver is completely revised and overhauled.
-sandblasted and repainted
-new original GOMACO stickers
-new oils and filters
-new hydraulic hoses

Year of building: 2005
Workinghours: 7.180h
ENGINE
Type: Tier 3 (Stage IIIA) John Deere turbo charged diesel.
Power: 200 hp (147,1 kW) 2200 rpm.
SERVICE CAPACITIES
Fuel reservoir: 88 gal. (333 L).
Hydraulic oil reservoir: 162 gal. (613 L).
HYDRAULIC SYSTEM
Pumps: Five load-sense pumps for track, vibrator, trimmer, and conveyor functions.
One pressure-compensated pump for lift and auxiliary functions.
One fixed displacement pump for powering the cooling system fan.
Filtration: Industry standard filtration, including 10 micron control circuit filter, 100 wire mesh control circuit strainers and reusable double magnetic sump strainers.
VIBRATORS
Type: Hydraulically powered, motor-in-head, variable speed, independently controlled.
Quantity: 16 hydraulic circuits; no hydraulic vibrators with mounts included.
TELESCOPING FRAME (four-track)
Telescoping: Frame hydraulically telescopes on the left side up to 6 ft. (1.83 m).
DRAWBAR & HOLD-DOWN ASSEMBLY
Hydraulic lift: 18 in. (457 mm) pressure-compensated hydraulic vertical adjustment with 6 in. (152 mm) manual vertical adjustment, allowing up to 24 in. (610 mm) of vertical adjustment.
Sideshift distance: 36 in. (914 mm) hydraulic sideshift.
WATER SYSTEM
Type: High-pressure water system.
Capacity: 110 gal. (416 L) tank, hose, and nozzle.
AUTOMATIC CONTROL SYSTEM
Type: Electronic-over-hydraulic.
Controls: GOMACO’s exclusive G+ control system features self-diagnostics for grade and steering and smart steer controls for paving accuracy and ease in operation. It features multi-language, metric or imperial settings, and a 6.5 in. (165 mm) anti-glare display screen.
Control indicators: Color graphical performance indicators allow operator to monitor control signals as machine follows stringline or 3D commands.
Reverse auto control: Single switch sets controls for automated control with machine traveling in reverse.
TRACK SYSTEM
Type: Hydraulically powered gear-driven crawler tracks.
Track length: 5.1 ft. (1.55 m). Overall length with fenders 6 ft. (1.83 m).
Track pad width: 11.8 in. (300 mm).
Track speed: For the three-track machine, up to 49.5 fpm (15.1 mpm) paving, and auxiliary up to 131 fpm (39.9 mpm); for the four-track machine, up to 37.1 fpm (11.3 mpm) paving; and auxiliary, up to 98 fpm (29.9 mpm).
Track tension: Fully automatic, hydraulically locks in on machine start-up, maintaining a steady tension on the track chain.
Leg height adjustment: Each leg adjustable in 4 in. (102 mm) increments for 28 in. (711 mm) manual adjustment with 42 in. (1067 mm) hydraulic adjustment.
Telescoping leg for positioning right front track: Hydraulically controlled, allows 36 in. (914 mm) lateral track adjustment range.
Power-slide leg for positioning rear track: Hydraulically controlled, allows 6.5 ft. (1.98 m) lateral track movement.
Power-swing leg for positioning left front track: Hydraulically controlled, allows track positioning from straight ahead to 13.5, 26, and 36.8 in. (343, 660, and 935 mm) to left outside of main frame or 13.5 and 26 in. (343 and 660 mm) to right toward center of main frame.
CHARGING CONVEYOR
Type: Hydraulically powered, reversible with charging hopper.
Length: 17.1 ft. (5.21 m) between pulley centers.
Width: 24 in. (610 mm).
Belt speed: Variable to 362 fpm (110 mpm).
Conveyor mount: 36 in. (914 mm) hydraulic slide adjustment with 6 in. (152 mm) hydraulic tilt cylinder and manual pivoting mount (slide and tilt) for negotiating discharge from the ready-mix truck and negotiating grade variations. Allows truck positioning to front or side of machine. Hydraulically powered mount controls conveyor slope.
SUBGRADE TRIMMER (sectionalized)
Sectionalized trimmer: Internal hydraulic drive system and 24 in. (610 mm) diameter trimming wheel.
Trimmer wheel rotation: Upward cut.
Width: 42 in. (1067 mm) sectionalized trimmerhead includes one 24 in. (610 mm) drive section with hydraulic internal drive and 18 in. (457 mm) extension. Extensions available for trimming up to 10 ft. (3.05 m) wide.
Sideshift and vertical adjustment: The trimmerhead mount for the three-track machine has 36 in. (914 mm) hydraulic sideshift, 18 in. (457 mm) of hydraulic vertical adjustment and 6 in. (152 mm) of manual vertical adjustment, allowing up to 24 in. (610 mm) of vertical adjustment.
THREE-TRACK MACHINE DIMENSIONS
Overall length: 23.3 ft. (7.1 m) without conveyor.
Transport height: 8.6 ft. (2.62 m) without the mold.
Transport width: 8.5 ft. (2.59 m) without ladder.
Transport length: 27.9 ft. (8.5 m) with conveyor (measurement varies with conveyor tilt, positioning and length) and 23.3 ft. (7.1 m) without conveyor.